LATEST UPDATE - 2022.09.02
09:30 - 10:00 Opening Ceremony - Welcome Addresses
10:00 - 11:00 1st Keynote speech
How to evolve chemical sensors from a university laboratory to the industrial world for Electronic Nose applications
Giorgio Sberveglieri,
University of Brescia and Nano Sensor Systems Srl, Italy
11:00 - 11:20 COFFEE BREAK
11:20 - 13:00 Session 1.1 - Quantum metrology
  ID 10 - Towards a novel programmable Josephson voltage standard for sampled power measurements
Bruno Trinchera, Danilo Serazio, Paolo Durandetto, Luca Oberto and Luca Fasolo
ID 11 - Precision Comparison of Quantum Hall Resistance in Graphene and Gallium Arsenide in Liquid Helium
Ngoc Thanh Mai Tran, Jaesung Park and Dong-Hun Chae
ID 69 - Memristive devices as a potential resistance standard
Vitor Cabral, Alessandro Cultrera, Shaochuan Chen Chen, João Pereira, Luís Ribeiro, Isabel Godinho, Luca Boarino, Natascia Deo Leo, Luca Callegaro, Susana Freitas, Ilia Valov and Gianluca Milano
ID 25 - Advancements in quantum voltage standards for time-dependent signals
Paolo Durandetto, Danilo Serazio and Andrea Sosso
ID 45 - AC Quantum Voltmeter used for Impedance Comparison
Damir Ilić, Ralf Behr and Jinni Lee
13:00 - 14:00 LUNCH
14:20 - 16:00 Session 1.2 - Measurements for power and energy I
  ID 35 - Laboratory reproduction of on-field low power quality conditions for the calibration/verification of electrical energy meters
Alessandro Cultrera, Gabriele Germito, Danilo Serazio, Flavio Galliana, Bruno Trinchera, Giulia Aprile, Martino Chirulli and Luca Callegaro
ID 49 - On Data Compression Algorithms for Power Measurements in Distributed Energy Systems
Paolo Bellagente
ID 22 - Simple method for calibration of PMU calibrators
Martin Šíra and Stanislav Mašláň
ID 46 - PMU-based metrics for Power Quality Assessment in Distributed Sensor Networks
Guglielmo Frigo, Marco Agustoni and Federico Grasso Toro
ID 72 - Temperature Rise in MV Switchgears: the Role of Loose Busbar Joints
Susanna Spinsante, Grazia Iadarola, Gianmarco Mazzocchi and Claudio Romagnoli
16:00 - 16:30 COFFEE BREAK
19:00 - 23:00 GALA DINNER
09:30 - 10:30 2nd Keynote speech
Quantum Electronics in Metrology: Cornerstones and Topical Developments
Hansjörg Scherer, PTB, Germany
10:30 - 10:50 COFFEE BREAK
10:50 - 12:10 Session 1.3 - Voltage measurements Session 2.3 - Signal processing and machine learning
  ID 14 - Design and Characterisation of 1 kV Multirange Resistive Voltage Divider
Stanislav Mašláň and Martin Šíra
ID 21 - Identification and Mitigation of Intermodulation Products Using a Baseband Polynomial Distortion Model with Instantaneous Frequency Dependence
Stanislas Dubois, Bruno Lelong, Jean-Michel Hodé, Guillaume Ferré and Dominique Dallet
ID 32 - Feasibility of a digital counterpart of thermal-converter-based current step up
David Peral, Yolanda A Sanmamed and Javier Díaz de Aguilar
ID 15 - Floating-Point Roundoff Error Analysis in Artificial Neural Networks
Hussein Al-Rikabi and Balázs Renczes
ID 57 - DMMs as voltage ratio standards:  a 20 years report
Pier Paolo Capra, Claudio Francese, Flavio Galliana, Marco Lanzillotti, Luca Roncaglione Tet, Andrea Sosso and Paolo Durandetto
ID 34 - Engine rotational speed estimation using audio recordings and machine learning algorithms
Cristian Fosalau, George Maties and Cristian Zet
50 - Lithium-Ion Batteries state of charge estimation based on electrochemical impedance spectroscopy and convolutional neural network
Emanuele Buchicchio, Alessio De Angelis, Francesco Santoni and Paolo Carbone
12:10 - 13:00 POSTER SESSION
  ID 6 - Automatic detection system of new energy vehicle charging pile based on image recognition
Jianbo Liu, Wenqiang Li, Weizhao Wang, Xuefeng Ma, Mei Yang, Bin Deng and Xinyan Wang
ID 12 - Online SFRA characterization of a batch of induction motors for predictive maintenance
Giovanni Bucci, Fabrizio Ciancetta, Andrea Fioravanti, Edoardo Fiorucci, Simone Mari and Andrea Silvestri
ID 17 - Design and validation of a reference multi-sensor cinemometer for law enforcement applications
Seif Ben-Hassine, Dominique Renoux, Catherine Yardin, Jabran Zaouali, Jimmy Dubard, Jean-Marie Lerat, Pierre Betis and Isabelle Blanc
ID 19 - Using historical data to improve electrical resistance standards measurement uncertainty
Marcelo Costa and André França
ID 33 - Research and application of time relay  calibration device
Bin Deng, Xiaoyan Sun, Mingyu Wang, Hailong Xu, Wenqiang Li and Zexin Guan
ID 39 - Research on online calibration method of refrigerator intelligent inspection line
Bin Deng, Hailong Xu, Jianbo Liu, Weizhao Wang, Xuefeng Ma and Zexin Guan
ID 42 - Characterization of Energy Harvesting systems from AC power lines
Fabrizio Ciancetta, Edoardo Fiorucci, Giovanni Bucci, Simone Mari, Andrea Fioravanti and Andrea Silvestri
ID 47 - Regional Interlaboratory Comparison of Measuring Systems for Current Transformers Accuracy Testing
Dragana Naumovic-Vukovic and Marko Cukman
ID 60 - First results on the functional characterization of two rotary comb-drive actuated MEMS microgripper with different geometry
Gabriele Bocchetta, Giorgia Fiori, Andrea Scorza, Nicola Pio Belfiore and Salvatore Andrea Sciuto
ID 62 - A first approach to the registration error assessment in Quality Controls of Color Doppler ultrasound diagnostic systems
Giorgia Fiori, Andrea Scorza, Maurizio Schmid, Jan Galo, Silvia Conforto and Salvatore Andrea Sciuto
ID 67 - Latest Advancements in SSVEPs Classification for Single-Channel, Extended Reality-based Brain-Computer Interfaces
Leopoldo Angrisani, Pasquale Arpaia, Egidio De Benedetto, Nicola Donato and Luigi Duraccio
ID 2 - Evaluation results of COOMET Key Comparison of Power
Oleh Velychko and Tetyana Gordiyenko
ID 65 - Instrumentation for EEG-based monitoring of the executive functions in a dual-task framework
Leopoldo Angrisani, Andrea Apicella, Pasquale Arpaia, Andrea Cataldo, Anna Della Calce, Allegra Fullin, Ludovica Gargiulo, Luigi Maffei, Nicola Moccaldi and Andrea Pollastro
ID 3 - Research of Long-Term Drift of the National High-Voltage DC Standard
Oleh Velychko and Ruslan Vendychanskyi
13:00 - 14:00 LUNCH
14:00 - 15:40 Session 1.4 - Measurement for power and energy II Session 2.4 - Biomedical measurements I
  ID 58 - Improvement of calibration capabilities with an a posteriori evaluation of the lighting impulse international comparison EURAMET.EM-S42
Stefano Emilio Caria and Paolo Emilio Roccato
ID 63 - Application Scenarios for Gait Analysis with Wearable Sensors and Machine Learning
Mauro D'Arco, Martina Guerritore and Annarita Tedesco
ID 5 - Design of integrated multi-user electric energy meter
Jianbo Liu, Wenqiang Li, Mei Yang, Xiao Liu, Bin Deng, Weizhao Wang and Xuefeng Ma
ID 52 - Measurements on human exposure in 5G cellular base stations environment
Marius-Vasile Ursachianu, Catalin Lazarescu, Ovidiu Bejenaru and Alexandru Salceanu
ID 66 - Characterization of a method for transmission line parameters estimation with respect to PMU measurement error modelling
Paolo Attilio Pegoraro, Carlo Sitzia, Antonio Vincenzo Solinas and Sara Sulis
ID 68 - Gaussian-based analysis for accurate compressed ECG trace streaming
Claudio Narduzzi, Alessandra Galli and Giada Giorgi
ID 53 - Measurement issues on harmonic analysis according to the IEC 61000-4-7
Giovanni Artale, Giuseppe Caravello, Antonio Cataliotti, Valentina Cosentino, Vito Ditta, Dario Di Cara, Nicola Panzavecchia, Giovanni Tinè, Nunzio Dipaola and Marilena Sambataro
ID 27 - Multiwavelet-based ECG compressed sensing with samples difference thresholding
Jozef Kromka, Ondrej Kováč, Ján Šaliga and Linus Michaeli
ID 20 - Bidirectional electricity meter metrological evaluation
Marcelo Costa
ID 56 - Numerical Modeling of the Magnetic Fields Generated by Underground Power Cables with Two-point Bonded Shields
Eduard Lunca, Silviu Vornicu and Alexandru Salceanu
15:40 - 16:00 COFFEE BREAK
16:00 - 17:40 Session 1.5 - Resistance and impedance measurements Session 2.5 - Instrumentation
  ID 13 - Interlaboratory Comparison of Low Impedance for Impedance Spectroscopy
Stanislav Mašláň, Hans He, Tobias Bergsten, Steffen Seitz and Tom Patrick Heins
ID 4 - Bias-induced Impedance of Current-carrying Conductors: Measurements Simulation Using FRA
Sioma Baltianski
ID 26 - Comparison of DC current comparator bridges for resistance metrology
Martina Marzano, Pier Paolo Capra, Cristina Cassiago, Vincenzo D'Elia, Enrico Gasparotto and Luca Callegaro
ID 9 - Increasing of Sampling Rate of Internal ADC in Microcontrollers by Equivalent-Time Sampling
Jakub Svatos, Jan Fischer and Jan Holub
ID 16 - Towards a fully automated, four-terminal pair, graphene impedance standard
Frédéric Overney, Blaise Jeanneret, Ali Eichenberger, Mattias Kruskopf, Yefei Yin, Stephan Bauer and Klause Pierz
ID 38 - Antennas Comparison Applied to Detect Partial Discharges Coupled via Dielectric Window and Oil Valve in Power Transformers
Arthur Silva Souza, Raimundo Carlos Silveiro Freire, Luiz Augusto M. M. Nobrega, Felipe Alexandre Da Silva Bento, George Victor Rocha Xavier and Marlo Andrade
ID 36 - Mutual validation of PTB’s Josephson and INRIM-POLITO’s electronic impedance bridges for the realization of the farad from graphene quantum standards
Martina Marzano, Yaowaret Pimsut, Mattias Kruskopf, Yefei Yin, Marco Kraus, Massimo Ortolano, Stephan Bauer, Ralf Behr and Luca Callegaro
ID 43 - Iterative Interpolated DFT-based Frequency Estimator for Electrical Waveform Affected by Decaying DC Offset
Daniel Belega, Dario Petri and Dominique Dallet
ID 41 - A New Impedance Metrology Infrastructure at GUM
Krzysztof Musioł, Maciej Koszarny, Marian Kampik, Krzysztof Kubiczek, Adam Q Ziółek and Jolanta Jursza
ID 44 - Cascaded H-Bridges Multilevel Inverter Drive: Active Power Analysis in Frequency Domain
Claudio Nevoloso, Ciro Spataro, Rosario Miceli, Antonino Oscar Di Tommaso, Gioacchino Scaglione and Giuseppe Schettino
09:00 - 10:00 3rd Keynote speech
Advanced Hall Magnetic Sensing and Measurement in Industry and Physics Laboratories
Dragana Popovic Renella,
SENIS AG, Switzerland
10:00 - 11:20 Session 1.6 - Biomedical measurements II
  ID 51 - A Preliminary Study on Flexible Temperature Sensors for Eskin Medical Devices
Tiziano Fapanni, Emilio Sardini and Mauro Serpelloni
ID 75 - A novel CS-based measurement method for radial artery pulse wave estimation
Jozef Kromka, Ján Šaliga, Ondrej Kováč, Luca De Vito, Francesco Picariello and Ioan Tudosa
ID 64 - Comparison between a PPG Wearable Device and an AFE4403-Based Pulse Oximeter
Erika Pittella, Alice Bologni, Roberta Cervoni, Vincenzo Fortunato and Emanuele Piuzzi
ID 40 - Design, metrological analysis and optimization of solenoid for homogenization of electromagnetic fields in biomedical experiments
Slavica Gajic and Platon Sovilj
11:20 - 11:40 COFFEE BREAK
11:40 - 13:00 Session 1.7  - Measurements by Radiofrequency I Session 2.7 - Sensors
  ID 7 - Calibration of pulse wave lightning protection component tester and analysis of measuring results
Xinyan Wang, Shang Wang, Xiaoyan Sun, Xiao Liu, Hongrui Yan and Xuefeng Ma
ID 28 - Static Characterization of the X-Hall Current Sensor in BCD10 Technology
Gian Piero Gibiino, Marco Crescentini, Marco Marchesi, Marco Cogliati, Aldo Romani and Pier Andrea Traverso
ID 8 - Material Characterization at Millimeter Wave Frequencies in TUBITAK UME
Erkan Danaci and Emre Cetin
ID 59 - Image quality comparison of two different experimental setups for MEMS actuators functional evaluation: a preliminary study
Gabriele Bocchetta, Giorgia Fiori, Andrea Scorza and Salvatore Andrea Sciuto
ID 71 - An electro-optic system implementing an accurate phase measurement method for sinewave signals
Luca De Vito, Francesco Picariello, Sergio Rapuano and Ioan Tudosa
ID 61 - A preliminary study on the blind angle estimation for Quality Assessment of Color Doppler ultrasound diagnostic systems
Giorgia Fiori, Andrea Scorza, Maurizio Schmid, Jan Galo, Silvia Conforto and Salvatore Andrea Sciuto
ID 23 - Compact Monopole Antenna for Smart Meter Applications in ISM Band 900 MHz
Marlo Andrade Santos, Raimundo Carlos Silvério Freire, Paulo Fernandes da Silva Júnior, Ewaldo E.C. Santana, Eduarda Froes dos Santos, Maria G.A. de Souza, Arthur S. Souza and Alexandre J.R. Serres
ID 70 - Development and Prototyping of a Capacitive Oil Level Sensor for Aeronautical Applications
Francesco Adamo, Filippo Attivissimo, Attilio Di Nisio, Daniel Lotano, Sergio De Gioia and Mario Savino
13:00 - 14:00 LUNCH
14:00 - 15:40 Session 1.8 - Measurements by Radiofrequency II Session 2.8 – Dielectrics, Conductors, Magnetics
  ID 29 - EMC Case Study: Using Resistors Instead of Ferrite Ring to Reduce Emission of Battery Powered Equipment
Tamás Bodolai, Gábor Hegyi and Angéla Váradiné Szarka
ID 37 - Traceability routes for magnetic measurements
Marco Coïsson, Javier Diaz De Aguilar Rois, Yolanda Alvarez Sanmamed, Oliver Power and Robert Walsh
ID 30 - Using a Simulation of ALSE Long Wire Method to Lower Measurement Uncertainty in EMC Measurements
Gábor Hegyi and Tamás Bodolai
ID 31 - Electrical and electromagnetic surveys to investigate the archaeological site of Pala Cannedda Nuraghe (Northern Sardinia)
Elisabetta Garau, Valeria Testone and Vittorio Longo
ID 48 - Design and test of an inkjet-printed microwave interdigital capacitor on flexible Kapton substrate
Giovanni Gugliandolo, Andrea Alimenti, Kostiantyn Torokhtii, Nicola Pompeo, Giuseppe Campobello, Giovanni Crupi, Enrico Silva and Nicola Donato
ID 54 - Microwave dielectric resonator device concept for surface impedance measurement of rotating sample
Kostiantyn Torokhtii, Andrea Alimenti, Nicola Pompeo and Enrico Silva
15:40 - 16:00 COFFEE BREAK

With the Patronage of


Sponsored By